EMS26658
Components:
Potassium Permanganate 1%
Phosphotungstic Acid-Haematoxylin
Oxalic Acid 5% Aqueous
Lugol's Iodine Solution
Russels Modified Zenkers Fluid
Fixation:
Formalin, 10% Neutral Buffered.
Sections:
Paraffin @ 6µm
Procedure:
Deparaffinise and hydrate to distilled water.
Incubate sections in Russell Modified Zenker’s Solution (with Acetic Acid) at 60°C, 1 hour. Wash sections in running water, 15 minutes.
Tone in Lugol’s Iodine15 minutes, then decolourise in 96% alcohol, 1 hour. Do not use Sodium Thiosulphate in this procedure because it will impair the further staining technique.
Wash in distilled water for 5 minutes, and then oxidise with Potassium Permanganate Solution for approx. 5 minutes.
Again decolourise the section using Oxalic Acid, 5%, 5 minutes, then wash in distilled water followed by running water for 5 – 10 minutes.
Stain in the PTAH (Phosphotungstic Acid – Haematoxylin) reagent, 24 hours.
Dip quickly into 95% alcohol, then further in absolute alcohol, two fast changes. Clear the slides in two changes of Xylene.
Mount
Stain Results:
Nuclei, Fibrin, Fibroglia, Microglia | Blue |
Elastic Fibrils, Coarse | Purplish |
References:
AFIP Manual of Histologic Staining Technique; ed. G. Luna., 3rd ed. McGraw-Hill Publications, c. 1968, p. 199.
