There are mounts available for most SEMs on the market which are listed below from Type A to Type R.
The test specimen of calibration standard is mounted on the selected SEM specimen mounts with conductive cement. All test specimens and calibration standards are normally mounted in the centre of the specimen mount. If a specific location other than the centre is needed, Mount G should be ordered along with a clear drawing for the custom mounting required.
Example of specimen position
Mounts
Type | Product | Dimensions | Compatible SEM |
A |
| Pin Mount: D=12.7mm; P=3.2mm; PL= 7.9mm | FEI/Philips, Cambridge, Leica, TESCAN, CAMSCAN, ASPEX, Phenom |
B |
| Pin Mount: D=12.7mm; P=3.2mm; PL=14.3mm | AMRAY |
C |
| Cylinder mount: 9.5mm dia. x 9.5mm | Cylinder, JEOL |
D |
| Cylinder mount: 15mm dia. x 15mm | Cylinder, JEOL, ISI/ABT/TOPCON |
E |
| Cylinder mount: 15mm dia. x 10mm | Cylinder, JEOL, ISI/ABT/TOPCON |
F |
| Pin Mount: 12.7mm x 3.2mm pin. PL=6mm | ZEISS/LEO SEMS FESEMs/FIBS |
G | | ||
K |
| Cylinder mount: 15mm dia. x 6mm | Cylinder, M4 Hitachi, Agilent / Keysight |
L |
| Cylinder mount: 25mm dia. x 6mm | Cylinder, M4 Hitachi, Agilent / Keysight |
M |
| Cylinder mount: 12.2mm dia. x 10mm | Cylinder, JEOL |
O |
| Platform mount: 31.7mm dia. x 6.47mm | Cambridge S4 Mount |
P |
| Pin Mount: 12.7mm dia. x 15.7mm height | AMRAY special slotted head |
Q |
| Cylinder mount: 25mm dia. x 10mm |
|
R |
| Pin mount: D=25.4mm; pin=3.2mm |
|
